Heat Treat Radio
Welcome to Heat Treat Radio, a podcast where Doug Glenn, publisher of Heat Treat Today, discusses cutting-edge topics with industry-leading personalities. Listen to interviews and hear the latest technologies and commercial happenings in the industry.
Subscribe to Heat Treat Radio on iTunes, Spotify, iHeart Radio, SoundCloud, and PodBean. You can also view episodes on Vimeo and YouTube. Choose from the list of episodes below. If you have a topic you’d like covered on Heat Treat Radio, contact Bethany by email.
Find Us On:
Listen To The Latest Epsiodes
Past Episodes
Heat Treat Radio #62: Thermocouples 101 with Ed Valykeo, Pelican Wire (Part 2 of 3)
Heat Treat Today publisher Doug Glenn has a second conversation with long-time thermocouple industry expert Ed Valykeo from Pelican Wire about (9.9.2021)
Heat Treat Radio #61: Thermocouples 101 with Ed Valykeo, Pelican Wire (Part 1 of 3)
Heat Treat Today publisher Doug Glenn sits down with Ed Valykeo from Pelican Wire in the first of a three-part series on all-things thermocouples. (8.26.2021)
Heat Treat Radio #60: High-Temperature Material Selection with Marc Glasser, Rolled Alloys
Heat Treat Today publisher Doug Glenn and Marc Glasser of Rolled Alloys on why choosing the cheapest material is not always the best way to go.(8.12.2021)
Heat Treat Radio (Special Video Edition): Heat Treat Tomorrow – Experts Look Forward 10 Years
Doug Glenn, publisher of Heat Treat Today, moderates a panel of 5 experts who address questions about the next 5-10 years in the heat treat industry. What are the trends […]
Heat Treat Radio #59: HIP & High Pressure Heat Treat with Johan Hjärne, Quintus Technologies
Heat Treat Radio host Doug Glenn sits down to talk with Johan Hjarne about high pressure heat treating and an e-book recently published by Heat (7.22.2021)
Heat Treat Radio #58: Indentation Plastometry with James Dean of Plastometrex
Heat Treat Today publisher Doug Glenn and James Dean of Plastometrex discuss indentation plastometry, a new technique for obtaining important mechanical property values for a wide variety of materials. The […]
Heat Treat Radio #57: Hot Isostatic Pressing – Join the Revolution
Heat Treat Today publisher Doug Glenn discusses hot isostatic pressing with Cliff Orcutt of American Isostatic Presses, Inc. Learn about the revolution that is occurring in the heat treat industry […]
Heat Treat Radio #56: Metal Hardening 101 with Mark Hemsath, Part 3 of 3
Heat Treat Today publisher Doug Glenn finishes his conversation with Mark Hemsath about metal hardness basics. Mark was formerly the vice (6.10.2021)
Heat Treat Radio #55: Spotlight on 40 Under 40 Leaders (Part 3 of 3)
In a special Heat Treat Radio series, 40 Under 40 winners from the class of 2020 respond with their stories and insights of their life and work in the (5.27.2021)
Heat Treat Radio #54: Metal Hardening 101 with Mark Hemsath, Part 2 of 3
Heat Treat Today publisher Doug Glenn talks with Mark Hemsath, vice president of Super IQ and Nitriding at SECO/VACUUM Technologies, about (5.13.2021)
Heat Treat Radio #53: Spotlight on 40 Under 40 Leaders (Part 2 of 3)
In a special Heat Treat Radio series, 40 Under 40 winners from the class of 2020 respond with their stories and insights of their life and work in the heat […]
Heat Treat Radio #52: Fluxless, Inert Atmosphere, Induction Brazing with Greg Holland, eldec LLC
Heat Treat Radio host, Doug Glenn, interviews Greg Holland from eldec LLC on fluxless, inert (4.15.2021)
Heat Treat Radio #51: Spotlight on 40 Under 40 Leaders (Part 1 of 3)
In a special Heat Treat Radio series, 40 Under 40 winners from the class of 2020 respond with their stories (4.1.2021)
Heat Treat Radio #50: Justin Rydzewski and James Hawthorne on CQI-9 Rev.4 (Part 4 of 4) – Expert Advice
Welcome back to the show. Heat Treat Radio host, Doug Glenn, wraps up a four-part series on CQI-9 Revision 4 changes (3.18.2021)
Heat Treat Radio #49: Metal Hardening 101 with Mark Hemsath, Part 1 of 3
Heat Treat Radio host Doug Glenn and Mark Hemsath, talk about hardening basics. What is it, why does it matter, and how do we do it? This is a great primer episode […]
Heat Treat Radio #48: The World of Ferritic Nitrocarburizing with Thomas Wingens
Heat Treat Radio host, Doug Glenn, talks with Thomas Wingens, president of WINGENS LLC – International Industry Consultancy, about the growing popularity of ferritic nitrocarburizing (FNC) and whom this process would […]
Heat Treat Radio #47: Justin Rydzewski and James Hawthorne on CQI-9 Rev.4 (Part 3 of 4) – Process Tables & New Resources
Heat Treat Radio host, Doug Glenn, conducts Part 3 of this 4-part series with James Hawthorne of Acument Global Technologies and Justin Rydzewski of Controls Service, Inc. about Revision 4 of CQI-9. We will hear about changes in process tables […]
Heat Treat Radio #46: Heat Treat Parts Washing with Thomas Wingens
Heat Treat Radio host, Doug Glenn, interviews Thomas Wingens about recent developments in parts washing technology. While many heat treaters gawk at the cost, it could be even more costly […]
